site map / search / help  
Home Page   Products Support Downloads Dealers What's New
Support:
 
Press Room:
 
Help:
Troubleshooting Guides: IC-M80, IC-M100 and IC-M120
Symptom: No TX, poor RX sensitivity.
Cure: Resolder cracked solder joints in VCO section.

Symptom: No RX/TX.
Probable Cause: PLL unlock.
Cure: Repair cracked solder in VCO sections.

 

IC-M56
Symptom: Flashing display.
Probable Cause: PLL unlock.
Cure: Repair cracked solder in VCO sections.

 

IC-M125
Symptom: Various logic-related symptoms including stuck in IC mode, no display, etc...
Probable Cause: Blown IC22 chip.
Cure: Replace IC22 chip.

Symptom: When dial is pressed, radio goes to channel 70.
Probable Cause: Lithium battery is shorting to radio.
Cure: Replace IC22 chip.

 

go back

 

 

All contents ©1996-2003 Icom America Inc. The Icom logo is a registered trademark of Icom Inc. Terms of use.